- Lab water system
- Medical water system
- Industrial water system
|
|
With 7.0 inch touch screen system, 3 way water quality sensor, 2 way flow sensor for quantified dispensing, 2 stage RO system and EDI module, Center-EDI series ultrapure water system is top choice of high flux ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 45 to 90 liters/hour. It can produce deionized water and ultrapure water. The deionized water’s resistivity is above 10 MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
|
Flow Schematic
Specifications
| Model |
Standard |
Eliminating endotoxin |
Low TOC |
Synthesizing |
| Center-EDI 45/60/90 |
Center-EDI 45/60/90F |
Center-EDI 45/60/90V |
Center-EDI45/60/90FV |
| Output -EDI water* |
45series-45 liters/hour, 60 series-60 liters/hour, 90 series-90 liters/hour |
| Output -ultrapure water |
Up to 2 liters/minute (when tank is full) |
| Ultrapure water quality |
 |
| Resistivity(25°C) |
18.2MΩ.cm |
| TOC* |
<10ppb |
<10ppb |
<3ppb |
<3ppb |
| Bacteria |
<0.01cfu/ml |
| Particle(>0.2&Micro;m) |
<1/ml |
| Endotoxin |
N/A |
<0.001Eu/ml |
N/A |
<0.001Eu/ml |
RNases |
N/A |
<1pg/ml |
N/A |
<1pg/ml |
DNases |
N/A |
<5pg/ml |
N/A |
<5pg/ml |
EDI water quality |
 |
| Resistivity |
>10MΩ.cm |
| TOC* |
<30ppb |
| Silicone rejection rate |
>99.9% |
| RO water quality |
 |
| Conductivity - 1st stage RO water |
Feed water conductivity×5%* |
| Conductivity - 2nd stage RO water |
1-5&Micro;s/cm* |
| Feed water requirements |
Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 |
| Dimension and weight |
Length × Width × Height: 610×585×1580mm / Weight: about 75Kg |
| Electrical requirements |
AC110-240V, 50/60Hz |
| Power |
480W |
| Standard configuration |
Main body (Including 1 set of cartridge)+built-in 20 liters PE tank and 20 liters pressure tank |
Remarks:
*The value will be influenced by temperature and feed water’s quality.
Cartridges |
| Item no. |
Commodity |
Approximate replacement term /set |
| C-PP |
Pretreatment cartridge |
2-6 months |
| C-AK |
KDF+ granular active carbon mixed cartridge |
12 months |
| C-AC2 |
Active carbon block cartridge |
6 months |
| C-RO-200 |
200 GPD reverse osmosis membrane |
12-24 months |
| C-RO-300 |
300 GPD reverse osmosis membrane |
12-24 months |
| C-RO-400 |
400 GPD reverse osmosis membrane |
12-24 months |
| C-RO-500 |
500 GPD reverse osmosis membrane |
12-24 months |
| C-RO-600 |
600 GPD reverse osmosis membrane |
12-24 months |
| C-EDI-HX50 |
EDI module |
12-36 months |
| C-EDI-HX100 |
EDI module |
12-36 months |
| C-Decart1 |
High flux mixed bed resin cartridge |
35000 liters pure water |
| C-Pocart3 |
High flux ultrapure polishing resin cartridge |
35000 liters pure water |
| C-Pocart4 |
Ultrapure polishing resin cartridge |
5000 liters pure water |
| C-Uvlcart-14W |
(254&185)nm wavelength uv module |
-- |
| C-Uvlamp-14W |
(254&185)nm wavelength uv lamp |
9000 hours |
| C-Ufcart |
Eliminating endotoxin uf cartridge |
-- |
| C-Tefit |
0.2µm terminal filter |
-- |
|
